ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL380 G5 Internal Health Light Flash

Occasional Visitor

DL380 G5 Internal Health Light Flash

Hey All,


I have made a monumental stuff up - I have a DL380 G5, 2PSU, 2 CPU


I am getting Internal Health Light Flashing at me. She was working and then just shut off, and thats all she wrote. Now, the fans come on full speed and just sits and flashes that very annoying red light at me.  No other lights what so ever.


So far I have

- taken out one CPU, tested-no joy, swopped cpu, no joy - so i am ruling out cpu

- same as above with the PSU, took one out, tested-no joy, swopped with the other one, no joy - so i am rulling out PSU

- dropped all ram to 1 stick, just as a good measure, when it failed again, i swopped the single stick with another, no joy

- taken out SCSI Controller, signal and power from drives cage


I am at a loss here? If anyone has experianced this, please help with your experiances.




Acclaimed Contributor

Re: DL380 G5 Internal Health Light Flash

Check if ILO still works, connect, check status and logs.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Hazem Bahgat
Frequent Advisor

Re: DL380 G5 Internal Health Light Flash

could you check that power supplies are not mal-functioning, and that fans are ok?
and update us with the results?

Best Regards and Appreciation,
Hazem Bahgat

Say thanks by clicking the "Kudos! Star" which is on the left.

Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.