ProLiant Servers (ML,DL,SL)
1748202 Members
3037 Online
108759 Solutions
New Discussion юеВ

DL380 G5 - Memory Configuration

 
Kursat
Occasional Contributor

DL380 G5 - Memory Configuration

hi,
i have DL380G5. Installed 16GB memory:
Socket1:4GB
Socket2:4GB
Socket3:4GB
Socket4:4GB
Socket5:Empty
Socket6:Empty
Socket7:Empty
Socket8:Empty

i bought 2 new RAMS. but i could not install them. it says:
POST Error: 207-Invalid Memory Configuration-Mismatched DIMMs within Bank B.

i remove the memomry which already works and replace the new one it works but i can not add net memories to the socket 5 or any other empty sockets..

thanx...
Kursat UGUROGLU
7 REPLIES 7
David Claypool
Honored Contributor

Re: DL380 G5 - Memory Configuration

Check the documentation for memory population rules.

"Upgrading Memory and Memory Interleaving
When upgrading memory, DIMMs 1A and 3A must match. DIMMs 5B and 7B, DIMMs 2C and 4C, and DIMMs 6D and 8D must match and must be installed as a pair. When DIMMs 1A and 3A are populated the system is automatically configured for 2:1 interleaving. When all 4 banks are populated the system is automatically configured for 4:1 interleaving. When four, six, or eight DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving."
Kursat
Occasional Contributor

Re: DL380 G5 - Memory Configuration

thax David,

so can i install 24GB (6 memories eachone is 4GB)?
would you lead me how i can do?
which sockets should been empty?
Kursat UGUROGLU
Kursat
Occasional Contributor

Re: DL380 G5 - Memory Configuration

thanx David..
u saved me!
i left empty 6th and 8th sockets and voila!..
anyway thanx for your lead..
Kursat UGUROGLU
mask_1
New Member

Re: DL380 G5 - Memory Configuration

thnx of All...
mano2
New Member

Re: DL380 G5 - Memory Configuration

hi,

      a have a server hp prolient dl380 g5 which showing the error 207- invalid memory configuration.

i have 4 ram 512 mb . how could i install these so that no error is showing.

 

Torsten.
Acclaimed Contributor

Re: DL380 G5 - Memory Configuration

If you have 4 dimms, you need to install them into

1A, 3A, 5B, 7B

You should find a table inside the server access panel (top cover).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Server-Support
Super Advisor

Re: DL380 G5 - Memory Configuration

Hi @Kursat try this link: http://h22195.www2.hp.com/DDR4memoryconfig/Home/Legal it shows you how which memory module is compatible with the server and also the layout to achieve certain combination that you want.

Best regards,