ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G5 Not PXE booting when MSA1000 attached

 

DL380 G5 Not PXE booting when MSA1000 attached

Greetings,

Now here is the deal:

Tryin' to perform a PXE bootin' on a DL380 G5 server has no succeess since I don't see the F12 prompt to do it. This happens only when a MSA1000 is attached to it.

Please notice that apparently this is not related to CUSTOMER ADVISORY Document ID: c01072574 becuase even if the card is connected to the server I'm able to get the F12 prompt if the MSA is disconnected.

I've tried changing the boot controller order and the IRQ's for the card with no success because the settings change once I restart the machine (obviously after I save them)

Any ideas or suggestions will be appreciated...

Regards,