HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G5 Redhat 5.2 Multipath with EVa 8000

 
abuitrago
Advisor

DL380 G5 Redhat 5.2 Multipath with EVa 8000

hi,

i have some dl380 G5 servers with Redhat 5.2 64bit. each server has a dual hba FC1142SR. I install the most recent support pack from hp 8.15

I want to connect this servers to an EVA 8000. My question is. By default the redhat's enable the use of multipath or i need to install and configure something?

I was reading in some other postk something about device-mapper-multipath software.

Best regards,
2 REPLIES
DSingh
Advisor

Re: DL380 G5 Redhat 5.2 Multipath with EVa 8000

Hi

Just downlaod the driver of FC HBA for RHEL 5 from http://support.hp.com
Install it... and thats it.

Once u install the driver, by default it will enable the multipath.

abuitrago
Advisor

Re: DL380 G5 Redhat 5.2 Multipath with EVa 8000

thats great,

i didn't now that just the driver enable the multipath use.

Thanks for the quick response..


Bye.