HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G5 Server

 

DL380 G5 Server

I have got new DL680 G5 servers i need to know how to enable the Systems Insight Display (The display that in the front panel of the system) to show the system state.
In Love with Life
2 REPLIES
David Claypool
Honored Contributor

Re: DL380 G5 Server

You don't need to do anything--it works automatically. The display operates on the "no news is good news" concept--nothing on the display means nothing is wrong.
KarloChacon
Honored Contributor

Re: DL380 G5 Server

Davis is completely right

taken from
http://docs.hp.com/en/AB419-9000B/ch01s07.html

"The System Insight Display LEDs enables you to look in a single location for the LEDs that provide failing customer replaceable units (CRUs) locating and mapping information for internal system components. These LEDs are solid amber only when a failure occurs, and are otherwise unlit (they are not green the rest of the time). The LEDs are visible on the front panel. Diagnostic LEDs are provided for each internal CRU in the system, including all DIMMs, system fans, and processors."

regards
Didn't your momma teach you to say thanks!