ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G5, VMWare ESXi Disc Monitoring

Pascal Rebsamen
Occasional Advisor

DL380 G5, VMWare ESXi Disc Monitoring

Hi,

i have a DL380 G5 with a P800 Controller installed, running VMWare ESXi. I used the VMWare ESXi HP Edition and can see FAN Status, Power STatus, ... but i cannot see the Disc Status.

In Ilo2 i can see everythin except the Raid Controller and Disc Status.

How can i monitor the Disc and Raid Controller Status of the System ?
3 REPLIES
Blazhev_1
Honored Contributor

Re: DL380 G5, VMWare ESXi Disc Monitoring

hi,

afaik, there is still no array monitoring support for the ESX3i so this is normal behaviour for now. Maybe this will be included in future release...

Regards
Pascal Rebsamen
Occasional Advisor

Re: DL380 G5, VMWare ESXi Disc Monitoring

very very bad.

but i can't see it in ilo too. in ilo, i must be able to see it ??
Pascal Rebsamen
Occasional Advisor

Re: DL380 G5, VMWare ESXi Disc Monitoring

ok, now i found out, that IML (Ilo2) is only show the error, when the server is rebooted.

that means i have to boot the server weekly to get infos about my raid status?