HPE Community
ProLiant Servers (ML,DL,SL)
1753515 Members
6097 Online
108795 Solutions
New Discussion

DL380 G6 ACU

 
weiinc
Occasional Contributor

‎03-19-2015 02:02 PM

‎03-19-2015 02:02 PM

DL380 G6 ACU

I just purchased a usedDL380 G6.

It seems to have been setup, but has little run-time on it. No dust, dings or dents.

It has no HDD so I installed two brand new, in the original packaging, 500GB SATA drives in slot 1 & 2.

I try to access the ACU however it flashes on the screen for less than hals a second and disappears.

There are no errors at POST.

Is there a bootable diagnostic that will help me troubleshoot my way thru this?

 

Any help will be greatfully accepted.

 

Mike

 

0 Kudos
Reply
1 REPLY 1
Sbrown
Valued Contributor

‎03-19-2015 06:12 PM

‎03-19-2015 06:12 PM

Re: DL380 G6 ACU

Press [f8] for raid bios may be disabled!

 

You can always use the SPP/SmartStart CD to access the raid controller or reset it!

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.