cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G6 ACU

 
weiinc
Occasional Contributor

DL380 G6 ACU

I just purchased a usedDL380 G6.

It seems to have been setup, but has little run-time on it. No dust, dings or dents.

It has no HDD so I installed two brand new, in the original packaging, 500GB SATA drives in slot 1 & 2.

I try to access the ACU however it flashes on the screen for less than hals a second and disappears.

There are no errors at POST.

Is there a bootable diagnostic that will help me troubleshoot my way thru this?

 

Any help will be greatfully accepted.

 

Mike

 

1 REPLY
Sbrown
Valued Contributor

Re: DL380 G6 ACU

Press [f8] for raid bios may be disabled!

 

You can always use the SPP/SmartStart CD to access the raid controller or reset it!