DL380 G6 'Red Screen'

[Sebastian Thuns]

Hi Guys,

maybe anyone here can help me with may problem.

I got a DL380 G6 with Novell SLES 10 SP2 running. Everytime the server boots i got a 'Red Screen' with illegal opcode. The code is shown in the attachment.

Thanks in advance

Sebastian

[Sebastian Thuns]

Here are some server information:

DL380 G6 contains
2x QC X5550
8x 4GB Dual Rank DDR3
1x SATA SlimLine DVD-RW
8x 300GB SAS 6GB/s HDD
1x 256MB FIO P-Serie Cache
2x RPS 750W
RAID 5 Settings
2x NC382i Ethernet Gigabit Server Adapter

[JKytsi]

Were You doing a install/reinstall ?

Go to BIOS and advanced options and choose erase settings and clear MBR. This will of course wipe everything from the server...

[Sebastian Thuns]

Problem exiting after install and reinstall linux.
Settings and MBR cleared.

Opened HP Support Call, clear and rebuild RAID changed Mainboard and flashflash firmwares.

Same Screen and Error.

Anyone have an idea...

[Svetoslav Gyurov]

Sebastian,

Did you manage to figure out where the problem is ? I'm having the same problem with DL785 after installing Oracle Unbreakable Linux. SLES11 and RHEL5 seem to be working fine.

Regards,
sve

[Kopp2]

The same issue (see attached screenshot).
Was anybody able to solve this problem?

By the way install directly from the operating system with F6 driver ( cp010733 ) produced a bluescreen.

STOP: c0000221 Unknown Hard Error - \SystemRoot\System32\ntdll.dll

[Sebastian Thuns]

Hi everyone,

the 'Red Screen' already exist.
The HP 2nd level support will send an update today.
i hope the update will bring results.

regards,
sebastian

[Kopp2]

Hi all,
I solved it for me.
Re-download of SmartStart_8.30.iso and W2k3_EE_x64.iso helped.
So long...
Regards,
J.Kopp

[Clieman_1]

I got the exact red screen error, I didn't use SmartStart, just boot up and install SUSE 10 SP2 DVD, any update from HP, million thanks

Clieman

[Sebastian Thuns]

Hey Guys,

i solved the 'Red Screen'!!!

Steps i made:

1. 2nd mainboard change -> reboot with 'Red Screen'
2. turn off and on the server
3. clear RAID
4. reboot
5. BIOS settings on default/ clear NVRAM
6. turn off and on the server
7. build new RAID -> no 'Red Screen'

After this martyrdom i installed SLES 10 SP2 from 4 CDs not the DVD downloaded from the novell site.

Maybe the 2nd mainboard got a defect and the 3rd is OK.

Can someone do this steps without changing the mainboard?

thanks,
Sebastian