DL380 G6 Windows Server 2016 installation

[47kOverlord]

Hey guys 

Yesterday I installed Windows Server 2016 on one of my DL380 G6. Before I installed firmware drivers with the SPP 2017-04-0 and after I installed Windows with no issues on a Raid 1.

After I got in Windows, I startet the SPP again and installed the drivers - but I have two "issues" I think:

1. First question - is this the right way of installation with the new SPP (my last installation was with the Smart Start CDs)  

2. The vendor name of the network card changed - from HP 382i to QLogic BCM5709? 

3. I have to not installed devices left -  IPMI Interface and Base System Device. I found drivers here: 

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1121413&swItemId=MTX_3118964d337545c0b67...

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_5b59a14a1d324256a9e31a421e

But unfortunately the drivers version is older than my driver version of my Server 2012 installation from my old server (for example iLO Management 1.18 from 2013 @Server 2012 and 1.16 from 2011 from the links).

Maybe somebody can help me out :) 

Greetz and thanks

[Racer-X]

I am in the same boat. I have been looking for hours. Can someone provide a link to the last Smart Start CD abailable? I still need to install the array utilitys. TIA

[RobRupo]

Im in the same boat here with my G6 and I have been looking for two days now, can somebody gve the link for the drivers please. I am doing research with this servers so it needs to be complete before I proceed forward.

Dr. Rob

[cook91]

on a server 2016 system

extract the 2012 driver

update driver using device manager