DL380 G6

[Christopher Stafford]

I need to configure the iLO of a DL380 G6 with a static IP, subnet, gateway, DNS and gateway. By pressing F8 during the boot process am I at the correct screen to do this?

If so, I'm there and under the Network tab looking at the Advanced Autoconfiguration Setup and Status box. I was able to configure the DNS but not the domain name.

Am I doing this right?

[TTr · Accepted solution]

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf

Page 64, 65. You can leave the bios based ilo config as is and continue the configuration by accessing ilo using a browser.

[Christopher Stafford]

thank you.

[Christopher Stafford]

issue solved.

[TTr]

Wow! That was the quickest 10 points I got, 41 seconds!

14:05:56 my reply
14:06:37 author's reply

[Christopher Stafford]

I'm used to working with c7000 enclosures and I didn't even think to access the iLO through the browser. You received 10 points for not only helping me but hitting me on the head with a duhhhh. thanks again.