BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

DL380 G7 ILO 3 Will Not Connect

Highlighted
Occasional Visitor

DL380 G7 ILO 3 Will Not Connect

So, this is a strange one. I have three DL380 G7s that I'm now trying to configure ILO on... which in and of itself isn't a big deal. The problem is that none of the three servers will pull a DHCP address for ILO, and if I hard set the IP information, I get no ICMP/Web IFC responses. This would usually point to a switch problem, but all ports are good, configured for correct VLAN, and the port show "Connected." I have a few various other HP servers that are on the same network that pull a DHCP address for ILO without a problem... the only difference I can see is that the 380s are using ILO 3 and the others are using ILO 2. Any ideas?