HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G7

 
buildmeit
Occasional Visitor

DL380 G7

Hi,

2 questions.

1. Just got a DL380 G7 with a optical dvd drive to be installed, how do I install the drive, I cant find how too take the plastic cover off?

2. Also when booting up how do I get into the P410i RAID, normally I would press F8 on boot up (on previous DL380's), but not seeing that.

thank you
3 REPLIES
Glenn Matthys
Frequent Advisor

Re: DL380 G7

For installation of the optical drive, please read the installation manual @ http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=be&docIndexId=64903&taskId=101&prodTypeId=15351&prodSeriesId=4091412

For the RAID controller, make sure the controller is enabled in the system's BIOS.
buildmeit
Occasional Visitor

Re: DL380 G7

Thanks, sorted there now!!

Also does anyone know where on earth I find the serial number for a HP Storageworks MSA60?

I have a failed disk in it which is then connected too a DL360 G6
gregersenj
Honored Contributor

Re: DL380 G7

To see the F8 prompt on G6 and G7 models.
Press any key, when promptet on the screen.

Thats after all the bullits in the lower right corner has turned blue.

BR
/jag