ProLiant Servers (ML,DL,SL)

Re: DL380 G9 errors - Can't read the CTR while initializing i8042

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

Re: DL380 G9 errors - Can't read the CTR while initializing i8042

Intelligent Provisioning is Linux too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
donsomu
Occasional Contributor

Re: HP Proliant DL380 G9 errors - Can't read the CTR while initializing i8042

Dear HPE Community,

I am installing "SUSE Linux Enterprise Server 12 SP3 Installer for SAP Business One" on a "HPE Server Proliant DL380 Gen9".

I am using a DVD containing an ISO image downloaded from https://download.suse.com/Download?buildid=j5aaHMFkICw~

When i boot from this DVD, i am able to start the installation process, i am asked to fill the required information, which i do.

However, when i now click "next" to now complete the installation, the server reboots .

When i now want to reboot from the hard disk, i get the following message below:

can't read ctr while initializing i8042 hp proliant

How can i be able to resolve this and proceed?

Note: I have tried the options given in previous responses but none is working so far.

Regards,

Davis