ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 Gen10 / Logical Drive Not Visible

 
rafa16s
Occasional Visitor

DL380 Gen10 / Logical Drive Not Visible

Hi,  recently acquired a DL380 Gen10. We create a RAID5 with 3 logical drives.

When we install the Operating System (Windows Server 2019) through Intelligent Provisioning it only sees the partition or logical drive where the Operating System is installed. Do not see the other 2 logical units. Do we have to activate any option for Windows to see the other logical drives?

Thanks!

2 REPLIES 2
Stephan G
Frequent Advisor

Re: DL380 Gen10 / Logical Drive Not Visible

As i do not know your expertise .. i have to ask this.

Did you initialize the drives through the windows disk management? (Set online - Format it etc)?

Highlighted
DANDKS
HPE Pro

Re: DL380 Gen10 / Logical Drive Not Visible

Greetings.

If the Operating System installation is completed, what is the status of the drives in Disk Management?

Do you see Unused Space or do you see the logical drives unformatted?

Refer to the Disk Management guides for more options.

Thank you


I am an HPE employee
Accept or Kudo