ProLiant Servers (ML,DL,SL)
1748169 Members
4045 Online
108758 Solutions
New Discussion юеВ

Re: DL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.

 
TerryTian
Occasional Contributor

DL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.

Hi 

I just wanna collect the AHS log in UEFI Shell via iLO,but when I mounted a USB drive that capacity is 32G with FAT32 format and typed "map -r" command,the USB drive cannot be recognized,is there any reason can cause that ?

thanks.

 

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: DL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.

in UEFI shell via ILO???

Where did you connect the USB drive?

The ILO USB port is not visible to the server, it is accessible by ILO only.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
TerryTian
Occasional Contributor

Re: DL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.

Hi Torsten

I configured static IP for iLO so that I can connect to server with ethernet cabel directly,(just for the test).

I logged in iLO,ran the IRC remote  on my laptop,also I inserted USB driver to my laptop,

I tried to mounted USB drive via iLO  to the server.

whatever, When I typed command map -r ,the usb drive cannot be regconized.

I don't know why,but When I mounted a folder to server ,the folder would be regconized.

 

 

Torsten.
Acclaimed Contributor

Re: DL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.

try
reconnect -r
map -r

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!