Could you provide links to the ISO file you are refering to?
It is probably
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8ccab9e4b99047138c2e608f97
and
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_6912b1ab040b4e23952cba99c2
The first has firmware and drivers, the second is used for provisioning and maintenance.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Hi
Gen9 ISO will have files related to Gen9 and previous versions.
Gen9 +Gen10 may have files related to Gen10 Servers as well.
Also the new SPP ISO are also available only for Gen10 and Plus servers.
If you have the SPP version, please share so that we can share the content report which gives the detailed information of respective SPP.
You can go to : https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
> Documentation > SPP Documentation > this will have the lists of Documents available.
Thank you
I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
To prevent confusion - there are 2x SPP2020.03
Gen10 only:
https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Gen9/Gen10:
For the second you need a service agreement, for the first you just need to log on and download.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!