DL380 Gen9 SERVER with W2016 SERVER - DRIVER POWER STATE FAILURE on Restart

[BGL2016]

Hello , 

We have the following Problem on an HP DL380 Gen9 Server . 

Operatingsystem is W2016 Server 64bit . 

Inserted are 2 x H221 , 2x H241 Cards on which is an Netapp E-Series Storage and 4 x LTO7 Tape Drives in an MSL 4048 connected. 

2x H221 - Netapp Storage 

2x H241 - LTO 7 Tape Drives . 

2 x 530 SFP+ 10Gbit Network Adapter . 

All Engery Save Settings are turned to off . The Server is set in BIOS to maximum Performance Mode. 

All Drivers and Firmware are Up to Date . Service Pack iso 06-2018 is allready installed . 

When we restart the Server then first the "Rebooting" from W2016 Server is shown for 10 minutes , after this the Bluescreen appears with : DRIVER POWER STATE FAILURE 

In the ILO Management Log there are this entrys :          

PCI Bus 07/19/2018 07:41   Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 28, Function 4, Error status 0x00000000)         

PCI Bus 07/19/2018 07:41    Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 0, Function 0, Error status 0x00000000)

System Error      07/19/2018 07:41  Unrecoverable System Error (NMI) has occurred.  System Firmware will log additional details in a separate IML entry if possible

PCI Bus 07/19/2018 07:41      PCI Bus Error (Slot 0, Bus 0, Device 0, Function 0)

The Mainboard is changed from the HP Technical Support for the second time. 

Hope someone can help me . 

Thanks 

Michael