ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 How to change a system disk in miroring

SOLVED
Go to solution
maiques_2
Advisor

DL380 How to change a system disk in miroring

Hi,
I have a DL380. The disk system is miroring. One of disk in miroring is in default.
I want to change it.
How to do for the new disk copy the disk used and not the disk (which one is OK for this server) in the server copy the new disk (that have no system or bad system).
Thanks.
4 REPLIES
Oleg Koroz
Honored Contributor

Re: DL380 How to change a system disk in miroring

what you trying to do ?
you have failed hard drive ?
you trying split mirror ?
or ? ......

DL380 Generation .... ?
Array controller ?

maiques_2
Advisor

Re: DL380 How to change a system disk in miroring

I want to replace the second disk of a mirror.
DL380 G4
Smart Array 6i
Thanks for your help.
chongkan
Trusted Contributor
Solution

Re: DL380 How to change a system disk in miroring

The Smart Array 6i and every other SS will recognize the HDD failure and will automatically boot ( if necesary ) from the redundant drive.

To replace the Dirve just swap teh failed one with the new one in hot-plug, the 6i will also detect that and start the rebuild.
maiques_2
Advisor

Re: DL380 How to change a system disk in miroring

Thank you.
I am going to do it.