DL380 g5-g7

[ess]

hi
i hava 2 ouestion
1- if everybody  know install dimm lp(low power)and other ram install mixed.( on the 380g5)
2- i have 1 dl380 g7 and install 3 hdd 146gb 10k and raid is p410 and version bios is 3.66 but when boot the system this error appeare hard drive need update to version hpdb but i update all divice with firmware mantanence 9.3 but error is stay.
please help my force.

[Matti_Kurkela]

1.) I think it's possible, but low power RAM is more expensive than regular RAM: if you mix them, they will all be used as regular RAM, so the advantage of low power RAM is wasted.

2.) You need a hard disk firmware update, which is different from the normal BIOS and RAID controller firmware updates. This will update the firmware on the actual disks.

I guess this is the disk firmware update you need:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=fi&prodTypeId=329290&prodSeriesId=1127655&swItem=MTX-35a3acd813dd4798a77cc6eca4&prodNameId=3766952&swEnvOID=54&swLang=8&taskId=135&mode=4&idx=1

Note the installation instructions: apparently the disk firmware update has not been included into the Firmware Maintenance CD for some reason.

[SFHR]

Q 1 : Not recomended

Q2: Please update Hard Drive Firmware either download from the site for Linux:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=fi&prodTypeId=329290&prodSeriesId=1127655&swItem=MTX-35a3acd813dd4798a77cc6eca4&prodNameId=3766952&swEnvOID=54&swLang=8&taskId=135&mode=4&idx=1

or if you have 9.0 or later Firmware DVD, that contains all required firmwares you may need to update it while system boot.

Boot your system from Firmware DVD/CD and select Automatic /Un attended Insallation.

Once server reboots remove CD and see if it fixes error

Regards,

[SFHR]

Did you try? What's the outcome.

Please feel free to ask should you need further assistance.

[ess]

Hi

i update server and all device with firmware maintanenc but not resolve my problem.