ProLiant Servers (ML,DL,SL)

DL380 gen 7 memory

 
heloooooo
Advisor

DL380 gen 7 memory

While increasing the memory of the DL380 gen7 server, I checked that each server has supported memory.
However, since all the purchased memories are discontinued, the memory not on the list operates, so the same installation operates the same memory, the same installation has the same memory check LED, and a strong beep continues.

What could be the reason??
I will attach pictures of old and new memories.

.existing.JPG

 
Existing memory

 

new.JPG

New memory

5 REPLIES 5
kira12
Frequent Advisor

Re: DL380 gen 7 memory

Hello,

the Picture is wery bad. If i read it correct one Memory is oranised as 2x4 and the Other is 2x8. You need 2x8 for this Type of Servers.

best regards ré

heloooooo
Advisor

Re: DL380 gen 7 memory

Sorry for the poor quality of the picture Thank you so much for taking a close look at my thoughts and responding.
SanjeevGoyal
HPE Pro

Re: DL380 gen 7 memory

Hello,

I would suggest you before upgrading memory or any other parts, please follow the Quickspace of the HPE products.

HP ProLiant DL380 Generation 7 (G7) (QuickSpecs) ( Follow the page no 2)

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04199811#

Memory Type DDR3 Registered (RDIMM) and Unbuffered (UDIMM)
Standard (Performance
Models)
12GB (6 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Base Models) 6GB (3 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Entry Models) 4GB (2 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Efficiency
Models)
4GB (2 x 2GB) PC3-10600E (DDR3-1333) Unbuffered DIMMS
Maximum (RDIMM) 384GB (12 x 32GB) for Registered Memory configurations
NOTE: Using PC3-8500R DDR3 Registered (RDIMM) memory, operating at
800MHz when fully populated at 2 DIMMs per Channel in 12 slots.
Maximum (UDIMM) 48GB (12 x 2GB) for Unbuffered Memory configurations
NOTE: Using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at
1066MHz when fully populated at 2 DIMMs per Channel in 12 slots.
NOTE: If only one processor is installed, only half the DIMM slots are available
NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: when populating with the 16GB Memory Kits (Quad-Rank), only 12 DIMMs can be populated.
NOTE: For G6 and G7 servers using Xeon 5600 series processors, the default memory speed is 1333MHz
with either one or two DIMMs per channel. For G6 and G7 servers using Xeon 5500 series processors, an
RBSU option is available to disable 1333MHz operation (which will result in 1067MHz operation).
NOTE: UDIMM support is only on 12-slot servers.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at

You have to follow the below link before purchasing the memory or any other parts.

HP ProLiant DL380 G7 Server - Spare Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02236664

HP ProLiant DL380 G7 Server - Option Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02755440

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

 


I am a HPE Employee

Accept or Kudo

Cali
Honored Contributor

Re: DL380 gen 7 memory

Hi,

check here, what you need and how to place it in the right Slots:

https://memoryconfigurator.hpe.com/

Cali


======================
I'm not an HPE employee, so I can be wrong.
SanjeevGoyal
HPE Pro

Re: DL380 gen 7 memory

Hello,

Please let me know if you have any queries.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo