HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 reports LDMS failure after power recovery

 
extecc
Occasional Visitor

DL380 reports LDMS failure after power recovery

We have two DL380's (One a G3 and one a G4) and after a recent power outage, when they powered back up, both are reporting the following:

"The Logical Disk Manager Service failed while registering for device handle notifications on device"

When viewing Disk Management, we can now only see the CD drive and a disk array on a separate SCSI controller, which makes me suspect the Smart Array 6i controller as being affected on both machines.

The main problem this is causing, is that W2K3 will now not see the pagefile, and complains that there is not one setup or it is too small when you restart the server.