ProLiant Servers (ML,DL,SL)
1753528 Members
5369 Online
108795 Solutions
New Discussion юеВ

Re: DL380 shuts down have to start manually

 
Mike_993
Occasional Contributor

DL380 shuts down have to start manually

Hi
I have problem with dl 380 G1. The Server shuts down every 2 to 3 days. I have to restart manually.
I run diagnostics everything looks OK
Any ides guys

Thanks
4 REPLIES 4
KarloChacon
Honored Contributor

Re: DL380 shuts down have to start manually

did you try another power supply?

did you check power cables?

did you check the power supply backplane? to check if it is properly seated

any error on Event viewer?
IML erros?

regards
Didn't your momma teach you to say thanks!
Macchi
New Member

Re: DL380 shuts down have to start manually

Hello Mike,
When exactly this start to happen? Have try to run the firmware maintenance CD and update the latest version of firmware, some of the cases this will help a lot.

Regards.
Peter.A.Wilson
Occasional Advisor

Re: DL380 shuts down have to start manually

Mike
you could also check the System managment console for degraded system devices. It could also possibly be a heat related problem.
good luck
Rancher
Honored Contributor

Re: DL380 shuts down have to start manually

Mike,
We had this problem with one of our servers. Same scenario. It turned out the UPS was buggy. Once we replaced it, the shutdowns stopped.