ProLiant Servers (ML,DL,SL)
1751755 Members
3969 Online
108781 Solutions
New Discussion

Re: [DL380E g8] Cooling fan still working loudly after self test

 
terosufix
Visitor

[DL380E g8] Cooling fan still working loudly after self test

After self testing fans still working at high speed after OS is load. I found one message that 1 fan is missing but it is redundant fan and server writes about it. Could you help me?

Russ below:

После самостоятельного тестирования вентиляторов они продолжают работатт на высоких скоростях даже после загруки ОС. Сервер говорит, что 1 вентилятор отсутствует, но он является изибыточным и сервер пишет об этом. Что может быть?

 

--------------------------------------------------------------------------------------------------------------------------------------

PS- This thread has been moved from Community and Feedback to Proliant Servers(ML, DL)- Forum Moderator

2 REPLIES 2
Suman_1978
HPE Pro

Re: [DL380E g8] Cooling fan still working loudly after self test

Hi,

 

Can you or did you swap the fans around to see if its a slot issue or fan issue.

Also try to clear NVRAM from RBSU level.

 

Thank You!
I am a HP employee.


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

terosufix
Visitor

Re: [DL380E g8] Cooling fan still working loudly after self test

finally i moved cooler from 6 to 1 slot and now it working pretty quiet. Thank you.