ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G2 no video unless I use the lights-out board...

John Wilson_21
Occasional Visitor

DL380G2 no video unless I use the lights-out board...

I have a DL380G2 that is having some problems. I'm trying to rebuild it, but the system hangs at random points. I've tried reseating ram and processors, but I'm not having any luck. I tried removing the lights-out board, but I get no video after plugging the monitor into the normal video connector and rebooting - I'm not sure the system is doing anything actually. All LEDs are green, no POST beeps, but no video. I get video when the lights-out board is installed and the monitor cable is plugged into it. I want to rule out the lights out board as part of the problem...

Any ideas?
2 REPLIES
Oleg Koroz
Honored Contributor

Re: DL380G2 no video unless I use the lights-out board...

at any point when used RILOE Card - It's normal you need to keep cable connected to RILOE not to the On-board
Oleg Koroz
Honored Contributor

Re: DL380G2 no video unless I use the lights-out board...

confu

check all dip switches from box of 6 all to OFF
enable #6 for 2 minutes and after try once again