DL380G3 iLO Administrator password forgotten

[Daniel Drobniak]

I have forgotten the password, during POST there is no F8 prompt to enter iLO settings

I tried to switch 'Security Override' but it doesn't change anything

how can I access this iLO if there are no "F8 prompt" to enter it?

fortunatelly I know IP of iLO NIC becouse it asks my DHCP, I can try login via www

[Manuel Boosch]

its not possible to change the iLo pass without entering it by pressing F8 during post.

maybe the ilo is defective. is the login screen apearing when u go trough "www" ??

regards

[Pavel_28]

If you can see logon page in your browser, then security override must help you to log in without any password.

[Daniel Drobniak]

what username should I use? I tried "Administrator" without any password

[juan quesada]

locate system switch (number 5 at page 17)
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01122783/c01122783.pdf

change dip switch 1 to ON
boot the server
press F8
change password
turn off server
change switch 1 to off again

JQ

[Daniel Drobniak]

when I boot with both switch positions "F8 prompt" is not available

[Daniel Drobniak]

no solution found