ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G3 iLO Administrator password forgotten

 
Daniel Drobniak
Occasional Advisor

DL380G3 iLO Administrator password forgotten

I have forgotten the password, during POST there is no F8 prompt to enter iLO settings

I tried to switch 'Security Override' but it doesn't change anything

how can I access this iLO if there are no "F8 prompt" to enter it?

fortunatelly I know IP of iLO NIC becouse it asks my DHCP, I can try login via www
6 REPLIES 6
Manuel Boosch
Frequent Advisor

Re: DL380G3 iLO Administrator password forgotten

its not possible to change the iLo pass without entering it by pressing F8 during post.

maybe the ilo is defective. is the login screen apearing when u go trough "www" ??

regards
Pavel_28
Occasional Advisor

Re: DL380G3 iLO Administrator password forgotten

If you can see logon page in your browser, then security override must help you to log in without any password.
Daniel Drobniak
Occasional Advisor

Re: DL380G3 iLO Administrator password forgotten

what username should I use? I tried "Administrator" without any password
juan quesada
Respected Contributor

Re: DL380G3 iLO Administrator password forgotten

locate system switch (number 5 at page 17)
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01122783/c01122783.pdf

change dip switch 1 to ON
boot the server
press F8
change password
turn off server
change switch 1 to off again

JQ
Daniel Drobniak
Occasional Advisor

Re: DL380G3 iLO Administrator password forgotten

when I boot with both switch positions "F8 prompt" is not available
Daniel Drobniak
Occasional Advisor

Re: DL380G3 iLO Administrator password forgotten

no solution found