HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G3 sees only one SCSI Logical Unit on external SCSI RAID

 
Mikhail_8
Occasional Contributor

DL380G3 sees only one SCSI Logical Unit on external SCSI RAID

We have Axus DaemonRAID attached to Proliant DL380 G3 via external VHDCI SCSI connector. DemonRAID is configured as two arrays with two Logical Units Numbers and it is assigned an unique SCSI ID. But in ORCA I can see only one SCSI device with specified SCSI ID at port # 1 and no more. HP Comand Line Array Configuration Utility also doesn't show the second device (DemonRaid's array with another LUN and same SCSI ID) in list of physical drives. Are there any solutions ? Will any BIOS upgrades solve this issue or Smart Array 5i Plus is not capable handling SCSI devices with multiple LUNs ?

SmartArray 5i Controller v2.36
ORCA version 2.02