HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G4 and BL20PG3

 
Manoj_28
Advisor

DL380G4 and BL20PG3

Hi,

I have DL380 G4 with two mirrored hard disk using integrated smart array controller.

Now I want to change server hardware to BL20PG3.

I am planning to remove one of the mirrored hard disk from DL380G4 and insert int into BL20PG3.

Anybody tried same or any similar experience.

Regards
Manoj


3 REPLIES
Andrzej Kowalik
Honored Contributor

Re: DL380G4 and BL20PG3

It should work. I tried in other way: from BL20pG3 to DL580G3 (novell 6.5) - both use controller 6i, like dl380g4.
regards,
Andrzej
SIVAKUMAR.P
Frequent Advisor

Re: DL380G4 and BL20PG3




Hi Manoj,

The DL380 G4 and BL20P G3 both SERVER having Embedded 6i-RAID Controller, so if it is possible to successes. But the DL380 G4 Server image has been generated by External 6404 Controller, it is not possible.

Same kind's of Experience we got it.

One of my Customer had bl20p g2 server, this Server having embedded 5i-controller.we are get the image from the DL360 G3 Server to BL20P G2 server it's working fine.

All the best

Thanks and Regards

Shiva.P
24/7 SUPPORT Mobile.No:919841509428
Terry Hutchings
Honored Contributor

Re: DL380G4 and BL20PG3

If you are using the embedded controller in each machine, then this should work fine. The only issues you may have will be because of different hardware architectures. This should be resolved by reinstalling the PSP over again.
The truth is out there, but I forgot the URL..