ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G5 ILO2 event id 57

SOLVED
Go to solution
young hoon
Member

DL380G5 ILO2 event id 57

OS: windows 2003 Ent SP2

Firmware Version
ROMPAQ : 2009-07-10(yyy-mm-dd)
P400 Array Controller :6.86
ILO2 : 1.79(driver : 1.12.0.0)

Occured event id 57 ilo2

Resolved ILO2 Firmware 1.78 & Driver 1.11.2.0 or later.

I want to know the cause....
7 REPLIES
Sameer_Nirmal
Honored Contributor
Solution

Re: DL380G5 ILO2 event id 57

Event ID 57 would occur for a few known issues you see in the event log in the earlier versions of iLO and driver. These issues would be on account of bug or incompatibility of some sort when there is communication between iLO 2 firmware and it's driver.

On the server you have, the iLO management driver needs to be updated to 1.11.2.0 or later.
marcus1234
Honored Contributor

Re: DL380G5 ILO2 event id 57

hmmmm young

young this is a known issue

event id 57 source hpqilo2

advisory says event id 57 etc

Perform the following steps to upgrade to iLO 2 Firmware Version 1.78 (or later):

Perform the following steps to upgrade to HP ProLiant iLO 2 Management Controller Driver Version 1.11.2.0 (or later):

But i

Online ROM Flash Component for Windows - HP Integrated Lights-Out 2 1.80
3 Nov 2009

HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008 1.15.0.0
18 Aug 2009



Please be aware that this issues was already fix and the new release can be found in the following directory

Windows server 2003 x32
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescripti
on.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&pr
odNameId=3288134&swEnvOID=1005&swLang=8&mode=2&taskId=1
35&swItem=MTX-eda4b854262041b381297b26d6

Windows server 2003 x64
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescripti
on.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&sw
Item=MTX-9b30f465983049fba87cb924bc&prodNameId=3288144&swE
nvOID=1113&swLang=8&taskId=135&mode=4&idx=2

Windows server 2008 x32
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescripti
on.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&pr
odNameId=3288134&swEnvOID=4022&swLang=8&mode=2&taskId=1
35&swItem=MTX-7337f21b3a1040f8ab868399f1

Windows server 2008 x64
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescripti
on.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&pr
odNameId=3288134&swEnvOID=4024&swLang=8&mode=2&taskId=1
35&swItem=MTX-7cac2815745e479eb8903f3ebb

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<
This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)
young hoon
Member

Re: DL380G5 ILO2 event id 57

Current
ILO2 Firmware : 1.79
Integrated Lights-Out Management Interface Driver :1.15.0.0
iLO 2 Management Controller Driver : 1.12.0.0

Today Occured event id 57 ilo2


I known ILO2 CUSTOMER ADVISORY
Document ID: c01802766

why current version occured ?
marcus1234
Honored Contributor

Re: DL380G5 ILO2 event id 57

first system bios and the supplemental update it is not on the cd , then the ilo firmware i mentioned , then reboot
then ilo driver again reboot then management driver reboot again ,

now what happens

i have fixed hundreds of these event id 57
if you do as above eror will be gone , then go in and clear eventlog see if it comes back, and clear windows events too


marcus1234
Honored Contributor

Re: DL380G5 ILO2 event id 57

and if it realy gets stubborn and that is done correct then


if issue continues
Stop hpqilo2>> driver in run box services.msc
next Clear the Event Log

now Reset the iLO2 firmware using the iLO2 homepage.
and clear the Iml Log

now lets Restart the server
important note >>>>>> below

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)
young hoon
Member

Re: DL380G5 ILO2 event id 57

Thank you~~~

I did not ilo2 reset....

^^
young hoon
Member

Re: DL380G5 ILO2 event id 57

thank you~~~