ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G6 Build via SCCM

garym_1
Occasional Contributor

DL380G6 Build via SCCM


hi, has anyone experienced issues when configuring disks during an SCCM PXE booted build where WinPE would fail to see the disks being configured? (diskpart states 'no fixed disks')

this seems to work/fail intermittently but normally after a fail, it would definitely work after a restart.

am using the 8.4 SSTK on WinPE 3.0 and configuring 4 or 6 disks in a RAID5 using hpacuscripting.exe -i config.xml -reset
3 REPLIES
JBerg
Occasional Visitor

Re: DL380G6 Build via SCCM

I am having the same issue, have you resolved this?
garym_1
Occasional Contributor

Re: DL380G6 Build via SCCM

no, this is not resolved and i've been informed that ideally, i need to reboot to PXE after configuring the array which isn't simple at all!
JBerg
Occasional Visitor

Re: DL380G6 Build via SCCM

I was noticing that I only got the failed diskpart errors when there was an OS already on the system so I created a diskpart task to delete the C drive volume before running the array config and so far I have not seen the error.  Just figured I would pass this along for anyone else having the same issue.