HPE Community
ProLiant Servers (ML,DL,SL)
1752805 Members
5587 Online
108789 Solutions
New Discussion

Re: DL380G6 Smartstart installation issue

 
themad
Occasional Advisor

‎11-16-2009 05:39 AM

‎11-16-2009 05:39 AM

DL380G6 Smartstart installation issue

Hi everybody,
maybe someone has the same problem.
I'm trying to set up a brand new DL380G6 with Windows Server 2003 R2 using Smartstart 8.30 CD remotely through an iLO connection.
I've created a logical drive on a RAID 1 and provided with all the information (partition size, licensing info etc.) and when the program starts to format the disk, the installation hangs with a strange error (see the attached picture).
I have no chance to install the OS using SS cd.
Does anybody have any suggestion?

0 Kudos
1 REPLY 1
themad
Occasional Advisor

‎11-16-2009 07:10 AM

‎11-16-2009 07:10 AM

Re: DL380G6 Smartstart installation issue

As I had to set up the new server urgently, I decided to install Windows without Smartstart, and apply the PSP afterwards.
I did so but I received another strange warning message regarding the Smart Array controller status, so I noticed that the installed firmware version was 2.00 and a newer one was available (2.50).
After updating the SA FW everything was fine, so I guess that the smartstart problem was due to a bug in the firmware version.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.