ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G6 power reset

huricane
Occasional Contributor

DL380G6 power reset

Hi, I have qst about DL380G6, with 2 power supply. server random reset and IML write problem with power supply. It`s this problem with power supply or backplaine with system board???
3 REPLIES
Mike Murphy_5
Occasional Visitor

Re: DL380G6 power reset

Check your iLO2 FW and Drivers. Had the same problem with ML370G5 running iLO2 v1.79. I have since updated the FW to latest (v1.81). You might see "BMC IPMI Watchdog Timer Timeout" in the iLO2 logs.

Re: DL380G6 power reset

Hi,

Let's make the settings in the link below.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01796362&prodTypeId=15351&-

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01955503
and

Power Management Option > HP Power Profile >Maximum Performance let set.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
TarunJain
Respected Contributor

Re: DL380G6 power reset

Hi huricane,

I agree with Jawserdi
The second link shared by him seems to contain resolution for this issue
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01955503

SUPPORT COMMUNICATION - CUSTOMER ADVISORY

Document ID: c01955503

Advisory: (Revision) HP ProLiant DL380 G6 Server - Limited Number of Servers Shipped Prior to November 16, 2009 (11/16/2009) and Configured with a System Board with Revision Level Earlier Than Rev 0S May Unexpectedly Reboot

Please share the status if issue still persists