ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380G7 - iLO3 Advanced Settings issues

 
jason-cs
Occasional Contributor

DL380G7 - iLO3 Advanced Settings issues

HI ALL,
Anyone here got encountered above issues?
I'm managed to obtain the iLO IP address by using DHCP - Shared Network Mode, and it's working fine.

But when we disabled the DHCP and set it to Static IP, the iLO IPs was still able to capture/save. But when go to the "Advanced Settings" - to configure the DNS, Wins and Domains (all the settings which have keyed in will get reset upon exist the settings).

Please advice. Thanks.
1 REPLY

Re: DL380G7 - iLO3 Advanced Settings issues

Hi,

check this ilo3 user guide.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063196/c02063196.pdf

regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.