DL380g5 and GL360g5

[CaSmuts]

I am doing a scripted (Windows Server 2003 Standard) install of both these servers and am getting to the point where Windows loads and you see the 39 minute remaining screen

At this stage it blue screens and the error is

"Stop 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in hpcisss2.sys".

The only driver I load is the one for the SAS controllers

Smart Array P400 (SA-P400) Controller
Smart Array P400i (SA-P400i) Controller

I use cp005761 as the driver and load that into my txtsetup.oem and my unnatend.txt file

Can anyone shed any light on how to fix this error

[ramesh_naik_]

Hi,

To prevent this STOP error blue screen from occurring, install Microsoft Windows Server 2003 Service Pack 1 (SP1) or upgrade the STORPORT.SYS driver to version 5.2.3790.274 (or later).

STORPORT.SYS Version 5.2.3790.2630 is available for download at the following Microsoft URL:
http://support.microsoft.com/kb/912944/en-us

For additional information regarding the STORPORT.SYS driver, reference the following Microsoft Knowledge Base articles:

Microsoft Knowledge Base Article 891793 - The updated Storport storage driver, version 5.2.3790.274, fixes various Storport-related problems in Windows Server 2003.
http://support.microsoft.com/default.aspx?scid=kb;en-us;891793

Microsoft Knowledge Base Article 825236 - IRQL_NOT_LESS_OR_EQUAL Error When an Application Sends an IOCTL_SCSI_PASS_THROUGH_DIRECT Request to a Miniport Driver.
http://support.microsoft.com/default.aspx?scid=kb;en-us;825236

Microsoft Knowledge Base Article 817789 - Computer stops responding with "Stop 0x000000D1 Driver_IRQL_Not_Less_Or_Equal" error message.
http://support.microsoft.com/default.aspx?scid=kb;en-us;817789

Hope this works!!!!

Regards,
rmn

[CaSmuts]

Hi

That did not fix my problem but send me in the right direction

There was a error in my script the txtsetup.oem in the disks part of the txtsetup.oem was not needed

This now works

Thanks for the help though

[ADYH]

I've got exactly the same issue, applying the Microsoft patches won't work in my case as the server blue screens whilst being built (using an unattended install).

I can't use the W2K3 SP1 slipstream CD's so does anyone have any ideas on a way forward?

[Torsten Streng]

Hi !

I've also the same problem.

This is my txtsetup.oem:

[Disks]
d1 = "Windows 2003 Driver Set v1.00", w23dsk1, \


[Defaults]
SCSI = s2


[SCSI]
s2 = "Server 2003 Driver for Smart Array SAS/SATA Controllers"
B060 = "Smart Array 5300 Controller"
B178 = "Smart Array 5i, 532, 5312 Controllers"
0046 = "Smart Array 6i, 641, 642, 6400, 6400EM Controllers"



[Files.scsi.B060]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.B178]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.0046]
driver = d1,cpqcissm.sys,cpqcissm
;dll = d1,cpqcissm.dll
inf = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat


[Files.scsi.s2]
driver = d1,HpCISSs2.sys, HpCISSs2
inf = d1,HpCISSx2.inf
catalog = d1,HpCISSs2.cat


[Config.cpqcissm]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,NumberOfRequests,REG_DWORD,80


[Config.HpCISSs2]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,DriverParameter,REG_SZ,"CSMI=None;"


[HardwareIds.scsi.B060]
id = "PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_B060","cpqcissm"


[HardwareIds.scsi.B178]
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_B178","cpqcissm"


[HardwareIds.scsi.0046]
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_40910E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11","cpqcissm"
id = "PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11","cpqcissm"
; W2K Default.
id = "PCI\VEN_0E11&DEV_0046","cpqcissm"


[HardwareIds.scsi.s2]
id = "PCI\VEN_103C&DEV_3220&SUBSYS_3225103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3234103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3235103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3212103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3211103C", "HpCISSs2"
id = "PCI\VEN_103C&DEV_3232&SUBSYS_40A00E11", "HpCISSs2"

And this is my unattend.txt:

[MassStorageDrivers]
"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"
"Smart Array 6i, 641, 642, 6400, 6400EM Controllers" = "OEM"
"Smart Array 5i, 532, 5312 Controllers" = "OEM"
"Server 2003 Driver for Smart Array SAS/SATA Controllers" = "OEM"

[OEMBootFiles]
cpqcissm.sys
cpqcissm.inf
cpqcissm.cat
txtsetup.oem
hpcisss2.sys
hpcissx2.inf
hpcisss2.cat

Hmm..... :o(

[CaSmuts]

Disk section
d1 = "HP SA SAS/SATA Controller",\, \

Defaults Section
SCSI = s2

SCSI Section
s2 = "HP SA SAS/SATA Controller"

#-----------------------------------------
# HP SA SAS/SATA Controller
#-----------------------------------------


[HardwareIds.scsi.s2]
id = "PCI\VEN_103C&DEV_3220&SUBSYS_3225103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3234103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3235103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3211103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3212103C","hpcisss2"

[Files.scsi.s2]
driver = d1,hpcisss2.sys,hpcisss2
inf = d1,hpcissx2.inf
catalog = d1,hpcisss2.cat


[Config.hpcisss2]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,DriverParameter,REG_SZ,"CSMI=None;"


# Supported Controllers
# SA P600
# SA P400
# SA E200i
# SA E200
# SA P400i


;=== HP Smart Array SAS/SATA Server 2003 Driver
[MassStorageDrivers]
"HP SA SAS/SATA Controller"=OEM
[OEMBootFiles]
TXTSETUP.OEM
HpCISSs2.sys
;generic.dll
HpCISSx2.inf
HpCISSs2.cat

This is a working one try it in this format ?

Regards

Chris

[Torsten Streng]

Hi!

Is it possible that you try the scripted install with Windows Server 2003 but without Service Pack 1?

Extract the Storport.sys from Service Pack 1 and integrate it in your I386.

This was the solution for me.

[james costanzo]

I used CaSmuts TXTSETUP.OEM and the Updated drivers from Hp Website for a P400 SAS Controller. Attached is my Answer file for and Unatteded Install of Windows 2003 X83 R2 with SP2. The install stops after coping setup files and then I reboot the server and Get a StopOp Code Red Screen. I have updated the the firmware on my DL 385 G2 Proliant But continue to get a Stop Op code red screen. Help from anyone would be greatly appreciated.


########################################
Unatteded.txt
##########################################
;SetupMgrTag
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=FullUnattended
OemSkipEula=Yes
OemPreinstall=Yes
DisableVirtualOemDevices=No
NoWaitAfterTextMode=1
TargetPath=\WINDOWS
DriverSigningPolicy=Ignore
OverwriteOemFilesonUpgrade=No
OemPnPDriversPath="Drv\Storage;Drv\n100;Drv\n1000;Drv\bxvbdx;Drv\n1e5132;Drv\n1g5132e;Drv\q57amd64"



[MassStorageDrivers]
"Windows Driver for Smart Array SAS/SATA Controllers" = "OEM"
"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "Retail"





[OEMBootFiles]
HpCISSs2.sys
HpCISSx2.inf
HpCISSs2.cat
txtsetup.oem



[GuiUnattended]
AdminPassword=
EncryptedAdminPassword=NO
AutoLogon=Yes
AutoLogonCount=1
OEMSkipRegional=1
TimeZone=35
OemSkipWelcome=1

[Components]
Appsrv_console = OFF
Aspnet = Off
complusnetwork = on
iis_common = Off
iis_smtp = Off
iis_www = Off
iis_inetmgr = Off
Iis_asp = OFF
Iis_serversideincludes = OFF
dtcnetwork = OFF
bitsserverextensionsisapi = On
bitsserverextensionsmanager = ON
IEHardenUser = on
TerminalServer = On
TSWebClient = On
WbemMSI = on
WBEMSNMP = On
Autoupdate=off

[Networking]
InstallDefaultComponents=Yes

[Identification]
JoinWorkgroup=ncci




[WindowsFirewall]
Profiles = WindowsFirewall.TurnOffFirewall


[WindowsFirewall.TurnOffFirewall]
Mode = 0




[NetOptionalComponents]
Beacon = 0
DHCPServer = 0
DNS = 0
IAS = 0
ILS = 0
LPDSVC = 0
MacPrint = 0
MacSrv = 0
Netcm = 0
NetMonTools = 1
SimpTcp = 0
SNMP = 1
WINS = 0
WBEMSNMP =1

[WindowsFirewall.Standard]
Services = RemoteDesktop

[WindowsFirewall.RemoteDesktop]
Type = 2


[TerminalServices]
AllowConnections=1



[UserData]
ProductKey=G943J-CVYTY-YHW39-XVBBB-XF8Y6
FullName="NCCI"
OrgName="NCCI"
ComputerName=Server1

[LicenseFilePrintData]
AutoMode=PerSeat

[SetupMgr]
DistFolder=\\Sms01hi\SMS_PACK\srvbuild\srvstd03\I386
DistShare=SRV03STD

########################################
TXTSETUP.OEM FILE
##########################################
Disk section
d1 = "HP SA SAS/SATA Controller",\, \

Defaults Section
SCSI = s2

SCSI Section
s2 = "HP SA SAS/SATA Controller"

#-----------------------------------------
# HP SA SAS/SATA Controller
#-----------------------------------------


[HardwareIds.scsi.s2]
id = "PCI\VEN_103C&DEV_3220&SUBSYS_3225103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3234103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3230&SUBSYS_3235103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3211103C","hpcisss2"
id = "PCI\VEN_103C&DEV_3238&SUBSYS_3212103C","hpcisss2"

[Files.scsi.s2]
driver = d1,hpcisss2.sys,hpcisss2
inf = d1,hpcissx2.inf
catalog = d1,hpcisss2.cat


[Config.hpcisss2]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,DriverParameter,REG_SZ,"CSMI=None;"


# Supported Controllers
# SA P600
# SA P400
# SA E200i
# SA E200
# SA P400i


;=== HP Smart Array SAS/SATA Server 2003 Driver
[MassStorageDrivers]
"HP SA SAS/SATA Controller"=OEM
[OEMBootFiles]
TXTSETUP.OEM
HpCISSs2.sys
;generic.dll
HpCISSx2.inf
HpCISSs2.cat

[Torsten Streng]

Hi James,

have you tried this?

http://h18023.www1.hp.com/support/files/server/us/download/27256.html