DL380p Gen8 - Installing Solaris 10u10/Solaris 10u9

[JeremyNguyen]

Hello,

I am getting an error trying to install Solaris 10u10 (Solaris 10 8/11) or Solaris 10u9 on ProLiant DL380p Gen8 -  

"No driver (or driver binding) was found for the interface used to boot. A driver (or driver binding) may be available in update or patch from Sun, or from the interface vendor"

I checked http://h18004.www1.hp.com/products/servers/solaris/supportmatrix/index.html and I do have the correct NIC card (HP Ethernet 1Gb 4-port 331FLR Adapter - Broadcom 5719)  installed on the system

HP Smart Array P420i Controller is seeing the 1 logical SAS drive.

I've disabled all the PCI adapters and leaving on the Smart Array P420i controller and HP Ethernet 1Gb 4-port 331FLR adapter enabled through the bios.

Thank You!

[Jimmy Vance]

Have you looked at the Oracle Solaris 10 Deployment Guide? It is a bit dated, but probably still applicable

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01153970/c01153970.pdf?jumpid=reg_R1002_USEN

This link is in the drivers section for Solaris on the Dl380p Gen8, there is a guide and the actual bundle itself.

Support Bundle for Oracle Solaris 10 (x86/x64) on ProLiant

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177958&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253DMTX_6980d8bd840e4f10907002acd5%257CswEnvOID%253D2023%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.v...