DL385 G2, Smart Array E200 with Solaris 11.2, cpqary3 3.0.0

[peterdian]

Hello;)

I wonder wheter some have the experience with Solaris 11.2 on DL385 G2 server with Smart Array E200 controller. Solaris 11.1 worked without problem, but in 11.2 there seems to be problem with cpqary driver - misconfigured.

All the information I have is here:

Solaris 11.2

scanpci:

pci bus 0x000c cardnum 0x08 function 0x00: vendor 0x103c device 0x3238

Hewlett-Packard Company Smart Array E200i (SAS Controller)

modinfo:

186 fffffffff7b85000   f7d0  57   1  cpqary3 (HP Smart Array Driver Ver 3.0.0)

DDU:

node name: pci103c,3212
Vendor: Hewlett-Packard Company
Device: Smart Array E200i (SAS Controller)
Sub-Vendor: Hewlett-Packard Company
Sub-System: Smart Array E200
binding name: pci103c,3212
devfs path: /pci@0,0/pci1166,142@12/pci1166,103@0/pci103c,3212
pci path: c,8,0
compatible name: (pci103c,3238.103c.3212.0)(pci103c,3238.103c.3212)(pci103c,3212)(pci103c,3238.0)(pci103c,3238)(pciclass,010400)(pciclass,0104)
driver name: cpqary3
driver state: Detached
initiator-interconnect-type: SPI
scsi-transport-timeout: 3c
scsi-poll-timeout: a
scsi-tag-age-limit: 2
scsi-selection-timeout: fa
scsi-watchdog-tick: a
scsi-reset-delay: bb8
scsi-options: 107ff8
scsi-enumeration: 0
pci-msi-capid-pointer: cc
assigned-addresses: 830c4010
reg: c4000
compatible: pci103c,3238.103c.3212.0
model: RAID controller
power-consumption: 1
devsel-speed: 0
interrupts: 1
max-latency: 0
min-grant: 0
subsystem-vendor-id: 103c
subsystem-id: 3212
unit-address: 8
class-code: 10400
revision-id: 0
vendor-id: 103c
device-id: 3238

and Solaris 11.1

modinfo:

191 fffffffff7f57000   e5d0  56   1  cpqary3 (HP Smart Array Driver V 2.4.6.1)

scanpci:

pci bus 0x000c cardnum 0x08 function 0x00: vendor 0x103c device 0x3238

Hewlett-Packard Company Smart Array E200i (SAS Controller)

and DDU:

node name: pci103c,3212
Vendor: Hewlett-Packard Company
Device: Smart Array E200i (SAS Controller)
Sub-Vendor: Hewlett-Packard Company
Sub-System: Smart Array E200
binding name: pci103c,3212
devfs path: /pci@0,0/pci1166,142@12/pci1166,103@0/pci103c,3212@8
bus addr: 8
pci path: c,8,0
compatible name: (pci103c,3238.103c.3212.0)(pci103c,3238.103c.3212)(pci103c,3212)(pci103c,3238.0)(pci103c,3238)(pciclass,010400)(pciclass,0104)
driver name: cpqary3
instance: 0
driver state: Attached
fm-accchk-capable: TRUE
fm-dmachk-capable: TRUE
fm-errcb-capable: TRUE
fm-ereport-capable: TRUE
tape: sctp
scsi-no-quiesce: 1
initiator-interconnect-type: SPI
scsi-tag-age-limit: 2
scsi-selection-timeout: fa
scsi-watchdog-tick: a
scsi-reset-delay: bb8
scsi-options: 107ff8
scsi-enumeration: 0
pci-msi-capid-pointer: cc
assigned-addresses: 830c4010
reg: c4000
compatible: pci103c,3238.103c.3212.0
model: RAID controller
power-consumption: 1
devsel-speed: 0
interrupts: 1
max-latency: 0
min-grant: 0
subsystem-vendor-id: 103c
subsystem-id: 3212
unit-address: 8
class-code: 10400
revision-id: 0
vendor-id: 103c
device-id: 3238
DISK : HP LOGICAL VOLUME
Capacity : 146G
Driver : sd
Path : /dev/rdsk/c8t0d0s2

If anyone have any clue, please feel free to share insights;) Thank you;)

Regards,

Peter

[RbBsmn]

Please check the support matrix:

http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04286545

Doesn't explain why it worked with 11.1, but explains why 11.2 doesn't work.

[peterdian]

Thank you very much for your help;) It seems that the controller should work correctly, even thoug it's not supported;)

I found this warning when booting Solaris 11.2, maybe it will shed some light on the problem and maybe there's some simple solution;)

solaris cpqary3: warning: ddi_intr_alloc(t=0x2, c=2) returned -4
solaris cpqary3: warning: ddi_intr_alloc(t=0x1, c=1) returned -4
solaris cpqary3: warning: failed to allocate interrupts

Thank you, looking forward to hearing from you:)

Sincerely,

Peter