ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL385p G8 Boot Mesage

 
Sploodge
Occasional Visitor

DL385p G8 Boot Mesage

When booting the above server ( I have 4 ) I get the following message:

 

*CLP:COMMAND_NOT_SUPPORTED*CLP:COMMAND_NOT_SUPPORTED*CLP:COMMAND_NOT_SUPPORTED

 

It happens just after saying "HP SmartMemory Authenticated in all populated SIMM slots"

 

Any suggestions? I have googled the message and cannot see reference to it. All 4 servers do the same, all are new and have been checked for firmwares/bios versions.

 

Andy

3 REPLIES
Torsten.
Acclaimed Contributor

Re: DL385p G8 Boot Mesage

Looks like an ILO scripting issue.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Oscar A. Perez
Honored Contributor

Re: DL385p G8 Boot Mesage

Those messages are coming from the BIOS. Are there any extra option cards on your systems? They could be incompatible with this system and could be causing this.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Sploodge
Occasional Visitor

Re: DL385p G8 Boot Mesage

Sorry for the late reply, been out of the office..

 

The server has two HP NC523SFP 10Gb NIC cards installed.. The error goes away if trhe cards are removed.. It gived the same issue on all 4 servers so doubt the issue is a faulty card/server. I am going to try a few things and will update back.. All else fails, ring HP..