ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL580 G1 -F1 to boot

JimboJones
Occasional Visitor

DL580 G1 -F1 to boot

Recieve the press F1 to boot prompt at start-up after the Raid controller has performed its data check.

Seen threads for this else where but no one seems to know how to disable/bypass this?
1 REPLY
JohnWRuffo
Honored Contributor

Re: DL580 G1 -F1 to boot

Jim:

You need to re-run and save the System Configuration using either your SmartStart CD System Configuration utility or the System Partition SCU. Once you save the new configuration, the server will not request you hit F1 to continue.

Here is a link that should help you:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00182008&prodTypeId=15351&prodSeriesId=341566&locale=en_US

G'luck! -john
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt