HPE Community
ProLiant Servers (ML,DL,SL)
1753502 Members
5077 Online
108794 Solutions
New Discussion юеВ

Re: DL580 G3 add new Processor

 
Lee Tae Mun
Occasional Contributor

тАО01-05-2006 12:09 PM

тАО01-05-2006 12:09 PM

DL580 G3 add new Processor

I have DL580 G3 with one 3.16Ghz CPU
I tried to add a new CPU with same part Number.
but starting boot, it's not work
Proc lamp was flashing red lamp
I also added a new PPM.
so I replaced another New cpu
but it's same
What Can I do
0 Kudos
Reply
2 REPLIES 2
The Spartan
Trusted Contributor

тАО01-05-2006 12:36 PM

тАО01-05-2006 12:36 PM

Re: DL580 G3 add new Processor

Suggestions -

1. Get into the RBSU of the server. Enable the option - Set Processor Correct.
2. In BIOS again, enable MPS table.
3. If aforesaid steps fail, upgrade ACPI drivers from the device manager>computer?properties option.

Regards,
Raghav
If you are keen to win, you should be willing to lose.
0 Kudos
Reply
Vijay_44
Honored Contributor

тАО01-05-2006 11:20 PM

тАО01-05-2006 11:20 PM

Re: DL580 G3 add new Processor

Is the firmware up to date?

the new firmware added support for new proc revs.

http://h18023.www1.hp.com/support/files/server/us/download/24014.html



Enhancements




Added support for new revisions of Intel Xeon MP processors

ThereтАЩs your problem!!! This thing is set to EVIL!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.