ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL580 G3 add new Processor

 
Lee Tae Mun
Occasional Contributor

DL580 G3 add new Processor

I have DL580 G3 with one 3.16Ghz CPU
I tried to add a new CPU with same part Number.
but starting boot, it's not work
Proc lamp was flashing red lamp
I also added a new PPM.
so I replaced another New cpu
but it's same
What Can I do
2 REPLIES
The Spartan
Trusted Contributor

Re: DL580 G3 add new Processor

Suggestions -

1. Get into the RBSU of the server. Enable the option - Set Processor Correct.
2. In BIOS again, enable MPS table.
3. If aforesaid steps fail, upgrade ACPI drivers from the device manager>computer?properties option.

Regards,
Raghav
If you are keen to win, you should be willing to lose.
Vijay_44
Honored Contributor

Re: DL580 G3 add new Processor

Is the firmware up to date?

the new firmware added support for new proc revs.

http://h18023.www1.hp.com/support/files/server/us/download/24014.html



Enhancements




Added support for new revisions of Intel Xeon MP processors

There’s your problem!!! This thing is set to EVIL!