ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL580 G4 cannot see controller.

 
SOLVED
Go to solution
Justin G
Occasional Advisor

DL580 G4 cannot see controller.

After I used SMP-P2P, I cannot see my Smart Array P400/256MB Controller in windows 2003 SBS. I have installed the Latest Firmware 7.9 & PSP 7.8 & then 7.9; All ideas are welcomed !!!

Justin
8 REPLIES
James ~ Happy Dude
Honored Contributor
Solution

Re: DL580 G4 cannot see controller.

Hello Justin,

SMP-P2P ??

You mean you cannot see it on Boot/POST ?

Regards,
James.
James ~ Happy Dude
Honored Contributor

Re: DL580 G4 cannot see controller.

Hello Justin,

SMP-P2P ??

You mean you cannot see it on Boot/POST ?
& which controller ?
Regards,
James.
Justin G
Occasional Advisor

Re: DL580 G4 cannot see controller.

James, controller is P400/256MB. SMP-P2P Stands for ProLiant Essentials Server Migration Pack-Physical to ProLiant. Thanks for ur effort !

Justin
Justin G
Occasional Advisor

Re: DL580 G4 cannot see controller.

the controller is not see in windows device manager.
James ~ Happy Dude
Honored Contributor

Re: DL580 G4 cannot see controller.

Justin G
Occasional Advisor

Re: DL580 G4 cannot see controller.

Superb! Your initial Q "whats SMP-P2P?" made me under estimate you. I was wrong. You proved to be far more efficient. Once I checked back, the device manager does show 'raid controller'. I wonder how i missed it. Thank you.

Justin
James ~ Happy Dude
Honored Contributor

Re: DL580 G4 cannot see controller.

Thank you !

Regards,
James.
Justin G
Occasional Advisor

Re: DL580 G4 cannot see controller.

That was it James !!