ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL580 G7 will not power off without press and Hold

Marc Sivak
Occasional Visitor

DL580 G7 will not power off without press and Hold

I have 6 identical DL580 G7 servers that are all encountering the same issue.  Running SLES 11.1 when told to shutdown the systems power down correctly, this occurs when momentarily pressing power as well.  The Problem is within 30seconds of the server being "OFF" they power back on automatically.  the following is logged in the ilo log and nothing else

 

iLO 3 11/14/2011 10:56 11/14/2011 10:52 5 Server power restored. 859 iLO 3 11/14/2011 10:55 11/14/2011 10:55 1 Server reset.

 

I have updated firmware, turned off ASR, changed power setting all over and no change in behavior. 

4 REPLIES
Jimmy Vance
HPE Pro

Re: DL580 G7 will not power off without press and Hold

First thing I'd try would be to go into RBSU - System Default Options and select Restore Default System Settings. Be sure NOT to select Restore Settings/Erase Boot Disk if you have any data on the disks.

 

In RBSU under Server Availability have you tried disabling Automatic Power-On?

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Marc Sivak
Occasional Visitor

Re: DL580 G7 will not power off without press and Hold

We've shut off the automatic power on and had no sucess.

 

5 of the six are still default(trying to minimize changes untill this is figured out), i'll try and reset one again to see if it clears anything.

Marc Sivak
Occasional Visitor

Re: DL580 G7 will not power off without press and Hold

No Cahnge in behavior using default settings either, or after disabling automatic power up again.
Jimmy Vance
HPE Pro

Re: DL580 G7 will not power off without press and Hold

I'm out of ideas on this one. With seeing the same issue on multiple machines you need to open a support case.

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!