ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL580 fan running and light on but no display to monitor and USB ports are not connected

Tsegaev
Occasional Visitor

DL580 fan running and light on but no display to monitor and USB ports are not connected

My University has bought a DL580 Gen 9 before months. The server only runs for one hour and then go off automatically. then we tried to change some cofiguration on the power. then the second problem comes:->The power, fans and network adaptor card are running fine,. But no display to the monitor via the VGA cable and the Keyboard and mouse i plugged on the USB ports are not functional. The light on the mouse sometimes on and then go off immediately. Please i need the solution

1 REPLY

Re: DL580 fan running and light on but no display to monitor and USB ports are not connected

Hi,

Do the nvram clear with system maintenance switch.
if problem persist. call hpe call centre

My idea is that the mainboard is defective.

BR.

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.