DL580 system board replacement

[Sean McLernon]

I need to replace the system board in a DL580 G2. I have the system board removal and replacement steps, are there any configuration steps that I will need to do either before or after the board is replaced?

[Marco Astegiano]

you can yourself be explained better! you have not never made it, is an operation much complicating, however with that type of machine the mainboard all mounted in the posterior estraibile small basket arrives, must only mark cables in order to reconnect them in the slot well just, to control all the switch that they are like the mb originates them and then you make to share the machine, if the serveur part the disc does not arrange must press F9 to the boot and choose the controller of start. good fortune

[Oleg Koroz]

From F9 enter correct Serial number for chassie as it was before. As Insight manager needs that and remote identification. Update System ROM and array 5i as any replacement might expirience shelf life. http://h18023.www1.hp.com/support/files/server/us/index.html