HPE Community
ProLiant Servers (ML,DL,SL)
1752815 Members
5959 Online
108789 Solutions
New Discussion

Re: DL580 will not POST

 
Ayman Altounji
Valued Contributor

‎09-18-2002 04:00 PM

‎09-18-2002 04:00 PM

DL580 will not POST

I have a ProLiant DL580 that was just purchased, and upon inital setup, the unit will not POST. When AC power is applied to the unit, the power/standby LED flashes Amber 8 times, then goes solid amber. the HD lights also go solid green when the system power switch is depressed. Any ideas??
0 Kudos
Reply
1 REPLY 1
Mark Cloutier
Respected Contributor

‎09-19-2002 04:00 PM

‎09-19-2002 04:00 PM

Re: DL580 will not POST

Please remove the side opanle and the illustration will show you "Interloc LED indicators". These will tell you where the fault is. Due to this being new, during shipping a peice of hardware might have come loose. Please reseat everything.
Please keep me posted.
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.