HPE Community
ProLiant Servers (ML,DL,SL)
1753602 Members
6448 Online
108796 Solutions
New Discussion

Re: DL580G3

 
Michael Haverbeck
Advisor

‎08-18-2005 06:06 AM

‎08-18-2005 06:06 AM

DL580G3

Hi @all,

i have a new DL580G3, 4 x 3 GB 8MB Xeon, 6 GB RAM. I use the two onboard nics in teaming fault tolerance only. I have all the new ROMPAQ FIRMWARE DRIVERS on the server and that thing is loosing its network connection 1 - 3 times a day. no eventlog entry - no entry in the SMH Log no dr watson nothing. anyone an idea what to do?

Thanks Mike
0 Kudos
Reply
1 REPLY 1
Mike Bollman_1
Respected Contributor

‎08-18-2005 07:09 AM

‎08-18-2005 07:09 AM

Re: DL580G3

I'm running the exact same system and have not seen any issues. Have you verified that you don't have any physical problems? Loose cables, bad cables, bad switch port? Are there any errors being reported on the NIC/Switch?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.