cancel
Showing results for 
Search instead for 
Did you mean: 

DL580G3

ww166164
Occasional Visitor

DL580G3

Hi,

post error message
207- Memory Configuration Warning - memory boards should be installed sequentially



Does anyone know how to do this?
4 REPLIES
vncl
Occasional Advisor

Re: DL580G3

that may be memory configuration issues
* DIMMs must be installed in pairs or sequentially
Action : Populate the processor socket or remove the DIMM
*Invalid memory configuration detected. Dimms installed when no correspoding processor is detected.
Action : Install a vail FBDIMMs pair if the system does not support single channel memory mode.
Remove and install FBDIMMs in the proper order.
Rajashekar Chintakunta
Honored Contributor

Re: DL580G3

Hi,

Refer the HP ProLiant DL580 Generation 3 (G3) Quickspecs, Memory section:

http://h18004.www1.hp.com/products/quickspecs/12195_na/12195_na.html#Memory

Regards,
Raj.
TarunJain
Respected Contributor

Re: DL580G3

The HP ProLiant DL580 G3 utilizes up to four Memory Boards that support up to four DIMMs each.
POST error message indicates that two memory boards are populated but instead of memory board 2, other board (3 or 4) is populated.

If previously the server was working fine and server has more than 2GB memory (2GB memory is detected at POST) then check for any error related to memory fault as the board can also be faulty.
ww166164
Occasional Visitor

Re: DL580G3

Thank you! I've been trying to get this information all week.