DL580Gen9 : x64 exception type 0d general protection exception

[Masoud3258]

Hi ,

How to fixed error?

[Suman_1978]

Hi,

Any recent hardware or firmware changes done?
This issue could be caused by old firmware of BIOS/iLO or Smart Array Controller.
Or try enabling/disabling UEFI optimized boot in BIOS configuration under Boot Options.

https://support.hpe.com/hpsc/doc/public/display?docId=mmr_sf-EN_US000018431
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623059

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

[Masoud3258]

I've upgraded : SPP 10/1/2017

When I turn on the server, it's 50% that I see this red screen error, I can not enter into any settings gonna be like F8 or F9

[lesposito]

hi, I have the same error on an HPE ProLiant DL580 GEN10 and i can't enter in any setup.

do anyone solved?

[aviorp]

Hello,

This appears to be an issue documented in the following advisory.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05257009

However, kindly log a support case for assistance.