cancel
Showing results for 
Search instead for 
Did you mean: 

DL585 G2

Phillip Judge
Occasional Contributor

DL585 G2

Hi,

I have a DL585G2 that will not start up. I have removed 3 processors & all of the ram apart from 2 GB, 4x512mb. When i power the server on the screen failes to load up the HP splash screen.

I have tested an exact model & this works fine.

Any ideas?

2 REPLIES
Phillip Judge
Occasional Contributor

Re: DL585 G2

also, no error lights on the front of the server or on the error board at the front right of the server
KarloChacon
Honored Contributor

Re: DL585 G2

hi Phillip

for that server if you want to test minimum configuration you have to use at least 2 Processors

1 Processor it is not min conf or that server it is 2 Procs so try 2 procs and test the other 2 as well

regards
Didn't your momma teach you to say thanks!